Dynalink RTA1320 Manual de usuario descargar pdf (Pagina 3)

Default Configuration for New Zealand

This Router is shipped with the following factory default settings.

Router IP address 192.168.1.1

Subnet mask 255.255.255.0

VPI 0

VCI 100

Connect mode PPPoA VC-MUX

NAT enabled

DSL line mode G.DMT

WAN IP dynamic

DHCP enabled

DNS relay on

UPnP IGD enabled

Firewall:

Incoming requests blocked

Outgoing traffic not blocked

Router configuration & management:

User name admin

Password admin

Telnet password admin

The majority of users in New Zealand will be able to connect using the default

factory setting. They can skip Section 6 of this Guide. Only if your ISP advises

explicitly that you have a ”PPPoE service”, then you need to follow Section 6.

Before you start

Make sure your computer has these installed:

Ethernet or USB port

TCP/IP protocol enabled

A web browser, Internet Explorer 5.x/Firefox1.x/Netscape 6 or better.

Obtain your Internet account information from your ISP:

Public IP address (only if you subscribe for static IP)

DNS server IP (only if specified by ISP).

ADSL 2+ Modem Router Quick Set-up Guide

1 2 3 4 5 6 7 8 ... 14 15

Sin comentarios

Dynalink RTA1320 Manual de usuario Pagina 3