Dynalink RTA1335 Guía de usuario descargar pdf (Pagina 3)

Username: Your Broadband username. This will be in the format of

username@deltacom.net.nz

Password: Your Broadband password.

Operating Mode: G992.1, G.DMT or ANSI T1.413 Issue 2

Protocol: PPPoA

ATM Settings: VPI=0, VC=100

Encapsulation: VC-MUX

NOTE: If VC-MUX doesn't work, try LLC/SNAP

ATM QoS-type: UBR

If you experience any difficulty finding where these settings should go, contact your

modem vendor or manufacturer for assistance.

11. Your modem may try to automatically connect to Broadband once you have entered

these settings. However it may still pay to look for a button within your modem menus

labelled 'Connect'.

12. You can tell if your modem's connected by looking at the lights on the front of it. The

two lights to look for are the DSL light and the PPP light. If both of these are lit up

solidly then you are connected.

Alternative names for the DSL light can be ADSL and SYNC. Sometimes the PPP light

can be labelled Status.

If you have any difficulty you may want to engage the services on an onsite technical

support specialist company such as Geeks On Wheels. Click here for more details.

How to find your modem's IP address in Microsoft Windows

1. Click on the Start button on the bottom left hand corner of the screen. NOTE: In

Windows Vista the start button is known as the Windows button.

2. Select Run from the menu that pops up.

3. In the field that appears, type in COMMAND and click on OK.

4. In the black window that appear, type in IPCONFIG /ALL and press Enter on your

keyboard.

5. Scroll through the results that appear in this window and look for an entry that says

Default Gateway. The set of numbers that appears after this is your modem's IP

address.

6. If there is no Default Gateway entry then check that your modem is on. If your

modem is on and there is still no Default Gateway entry, contact your modem

vendor or manufacturer for further assistance.

If you're having any issues setting up your Dynalink modem and you're running Microsoft

Windows 98, ME, 2000 or XP, you should try running the Deltacom Broadband Setup CD

1 2 3 4 5 6 7 8 9 10 11

Sin comentarios

Dynalink RTA1335 Guía de usuario Pagina 3